All News: Tommaso Carla


iRacer Profile: Tommaso Carla

March 2nd, 2013 by

It took Tommaso Carla two stabs at supplying his answers for this week’s iRacer Profile.  The first go produced a number of, er, brief (not to say monsylabic) answers.  So much so that Tommaso re-sent his answers with an apology for the first set being a little too “Raikkonen-esque.” While Tommaso stopped well short of … Read the Rest »

Streetley Crowned Champion, Carla Takes Victory

January 25th, 2013 by

Week 12 of the iRacing.com Skip Barber Series visited Summit Point Raceway in West Virginia, USA.  This circuit was perfectly built for the Skip Barber at 1.98 miles (3.187 km) in length with 10 turns.  The lap begins down a long main straight with hard braking just like many other tracks we have visited this … Read the Rest »

O’Keefe Strikes at Mid-Ohio

January 11th, 2013 by

Week Ten brought the iRacing.com Skip Barber Series to Mid-Ohio Sports Car Course, located in Lexington, Ohio, USA.  The tricky 13 turn, 2.25 mile (3.62 km) circuit attracted sim-racers from across the globe, with 866 drivers competing in a race, 397 turning a qualifying lap, and 168 completing a time trial.  This high race participation … Read the Rest »

Sun Shines on Carla in California

January 3rd, 2013 by

Week Nine brought the iRacing.com Skip Barber Series to Mazda Raceway Laguna Seca, located in Monterey, California, USA.  The eleven turn, 2.238 mile (3.602 km) track challenged sim-racers with the tight circuit surrounded by sand as far as the eye can see.  This circuit is among Oran Raceway Park the base content available to iRacing.com … Read the Rest »

Success For Carla in Australia

December 26th, 2012 by

Week Eight brought the iRacing.com Skip Barber Series to Oran Raceway Park, located in Narellan, New South Wales, Australia. The twelve turn, 1.62 mile (2.61 km) circuit challenged drivers with a tight inner-section, followed by a long front straight.  This created exciting online racing all week long, attracting 555 race entrants, 238 of them completing … Read the Rest »